Skip to main content
  • Pricing
Tutorials

Tesla Valve Physics: How a No-Moving-Parts Valve Works and What Tests Show

By Oakgen TeamPublished 3 min read

Share
Tesla Valve Physics: How a No-Moving-Parts Valve Works and What Tests Show

A Tesla valve is a fluid channel with no moving parts whose looped internal shape lets liquid or gas pass with little resistance in one direction and meets it with more resistance in the other. Nikola Tesla patented the idea in 1920. Laboratory tests a century later confirm the effect is real, but for the original shape in water it is closer to a factor of 2 than the 200 the patent mentions.

What the patent says

Google Patents lists US 1,329,559, "Valvular Conduit", as filed by Nikola Tesla on 21 February 1916, renewed on 8 July 1919 and granted on 3 February 1920. The text argues that conventional valves are delicate, wear out and add cost, and says the invention achieves one-way action without moving parts.

The conduit is lined with recesses or "buckets" and partitions. According to the patent, fluid entering at the favourable end follows a nearly straight path and meets very little resistance. Fluid entering from the other end is "quickly deflected and reversed in direction, set in whirling motion, brought to rest and again accelerated". Between neighbouring buckets, the patent says, fluid in the disturbed direction undergoes two complete reversals of 180 degrees, while in the other direction it suffers only two small deviations of roughly 10 to 20 degrees.

It then puts a number on the effect: "The theoretical value of this ratio may be 200 or more, but must be taken as appreciably less". It adds that the device works best when flow arrives in sudden pulses and that more buckets in series strengthen the action.

How performance is measured

Researchers treat the Tesla valve as a fluidic diode. The standard yardstick is diodicity: the pressure drop in the reverse direction divided by the pressure drop in the forward direction at the same flow rate (Wang et al. 2023; Bohm et al. 2022). A diodicity of 1 means no preference at all. A mechanical check valve, by comparison, normally uses a moving element such as a ball to block reverse flow, which is the part the Tesla design tries to remove.

What experiments found

A group at New York University laser-cut a clear acrylic copy of Tesla's planform, 30 cm long, 0.9 cm wide on average and 1.9 cm deep, and tested it with water and water-glycerol mixtures. In Nature Communications they report that diodicity sits near 1 up to a Reynolds number of about 100, turns on abruptly between roughly 100 and 300, and is close to 2 from 300 to 1,500. They tie that switch-on to nonlinear pressure behaviour and an early transition towards turbulence.

A companion paper in the American Journal of Physics, written for teaching the electronic-hydraulic analogy, found the same asymmetry in water at Reynolds numbers around 1,000, with a ratio of about 2. It describes the device as a "leaky diode" and notes that it is unclear whether Tesla ever built a prototype, since the patent supplies no data.

Pulsing does help, as the patent predicted. The Nature Communications team built a circuit in which oscillating flow is rectified into one-way flow, acting as an AC-to-DC converter or pump, and report that pulsatile forcing improved diodic performance, which they say supports Tesla's conjecture.

Why scale matters

Flow regime decides everything. The Nature Communications authors state that valving action is absent at Reynolds numbers far below 1, where flow is reversible. For chips, Bohm and colleagues point out that established passive-valve designs lose function at small Reynolds numbers, and report optimised structures reaching a diodicity of up to 1.8 at 20 microlitres per second, a Reynolds number of 36.

Stacking units can raise the effect. Wang and colleagues studied multistage valves numerically and experimentally and conclude that the gain from extra units comes mainly from distorted inflow reaching each following unit; when they lengthened the gap between units, diodicity fell.

A worked example

The NYU rig sets pressure with water-level differences, using ฮ”p = ฯgฮ”h. For water, ฯ is 1 g/cmยณ and g is 980 cm/sยฒ. A 10 cm level difference gives 1 ร— 980 ร— 10 = 9,800 dyn/cmยฒ, which is 980 pascals. If the valve has a diodicity of 2 at the flow rate in question, driving the same flow backwards needs about twice the pressure, roughly 1,960 pascals, the equivalent of a 20 cm water column. Because diodicity varies with flow, this is an illustration rather than a design number.

A short checklist before relying on one

  1. Estimate the Reynolds number for your fluid, channel size and speed. Below about 100, expect little or no direction preference in the original geometry.
  2. Between about 300 and 1,500, expect something like a factor of 2 for a single unit of Tesla's shape, as measured in water.
  3. Plan for leakage. The valve raises reverse resistance; it does not seal.
  4. If the supply pulses, test with pulses, because steady-flow figures understate what the patent claims.
  5. Measure your own design. Wang et al. show that spacing and stage count change the result.

Take this further with Oakgen Agent

Agent can explain the physics, run calculations in a Python sandbox and produce a worksheet with solutions as a document.

Looking for a recap of one specific YouTube video? The YouTube Summarizer does that today.

Open this task in Oakgen Agent

The prompt is filled in for you. Nothing is sent until you press send.

Open in Oakgen Agent

Frequently asked questions

What is a Tesla valve?

A Tesla valve is a channel with no moving parts whose internal geometry gives different flow resistance in the two directions. Nikola Tesla described it as a 'valvular conduit' in US patent 1,329,559, filed on 21 February 1916 and granted on 3 February 1920, according to Google Patents. Researchers now call it a fluidic diode because it lets fluid pass more easily one way than the other.

Does a Tesla valve completely block backflow?

No. In the New York University experiments published in the American Journal of Physics, the conduit behaved as a 'leaky diode' with higher but finite resistance in the reverse direction. Fluid still flows backwards if the pressure difference is large enough; the valve only makes it harder.

Is the 200-to-1 figure in the patent real?

The patent says the theoretical ratio of the two resistances 'may be 200 or more, but must be taken as appreciably less'. The NYU authors write that it is unclear whether Tesla ever built and tested a prototype and that the patent gives no data. Their water tests at Reynolds numbers around 1,000 found a ratio closer to 2 than 200.

Do Tesla valves work in microfluidic chips?

Only with care. The Nature Communications study notes that valving action is absent at very low Reynolds numbers because the flow is reversible. A 2022 Microsystems & Nanoengineering paper reported optimised designs reaching a diodicity of up to 1.8 at a flow of 20 microlitres per second, a Reynolds number of 36.

Sources

  1. Google Patents, US1329559A, Valvular conduit, Nikola Tesla (filed 21 Feb 1916, granted 3 Feb 1920; read 2026-11-19)
  2. Nguyen, Abouezzi and Ristroph, Early turbulence and pulsatile flows enhance diodicity of Tesla's macrofluidic valve, Nature Communications (17 May 2021; read 2026-11-19)
  3. Nguyen et al., Tesla's fluidic diode and the electronic-hydraulic analogy, American Journal of Physics 89(4), arXiv:2103.14813 (read 2026-11-19)
  4. Bohm et al., Highly efficient passive Tesla valves for microfluidic applications, Microsystems & Nanoengineering (7 Sep 2022; read 2026-11-19)
  5. Wang, Hu, Liu, Xu, Wang and Scheid, On the diodicity enhancement of multistage Tesla valves, Physics of Fluids 35, 052010 (2023; read 2026-11-19)
Share