Heat always moves from a hotter place to a colder one, and it does so in three ways. Conduction passes energy between neighbouring particles, convection carries it along with a moving fluid, and radiation sends it as electromagnetic waves that need no material at all. Real situations usually mix them, so the useful skill is knowing which one dominates and which formula to reach for.
Conduction: energy handed along by collisions
OpenStax's College Physics 2e describes conduction as heat transfer through a material by molecular collisions: faster-moving molecules pass energy to slower neighbours, so there is a net flow from hot to cold. HyperPhysics at Georgia State University paints the same picture with a metal rod heated at one end, where the material itself does not move.
The rate of conduction through a slab is
Q/t = kA(Tโ โ Tโ) / d
where k is the material's thermal conductivity, A the area, d the thickness and Tโ โ Tโ the temperature difference across the slab. Double the area and the rate doubles; double the thickness and it halves.
OpenStax lists conductivities near 0 ยฐC in J/sยทmยทยฐC:
| Material | k (J/sยทmยทยฐC) |
|---|---|
| Copper | 390 |
| Aluminum | 220 |
| Steel (stainless) | 14 |
| Ice | 2.2 |
| Glass (average) | 0.84 |
| Water | 0.6 |
| Wool | 0.04 |
| Air | 0.023 |
| Styrofoam | 0.010 |
Put the same slab (1 mยฒ area, 1 cm thick, 10 ยฐC difference) into the formula with those values and the spread is enormous: about 390,000 W for copper, 840 W for glass and 23 W for air. That is Oakgen's arithmetic from the table, and it assumes the air stays still.
OpenStax works two examples. An ice box with 0.950 mยฒ of Styrofoam (k = 0.010), 2.50 cm thick, with 35.0 ยฐC outside, leaks 13.3 J/s. Over a day that is 1.15ร10โถ J, enough to melt 3.44 kg of ice. In the second, an aluminum pan base 0.800 cm thick with an area of 1.54ร10โปยฒ mยฒ passes 2.26 kW with only a 5.33 ยฐC difference across it, because aluminum's conductivity is so high.
Convection: heat carried by moving fluid
OpenStax defines convection as heat transfer driven by the large-scale flow of matter and notes it is usually more complicated than conduction. Natural convection comes from buoyancy: hot fluid is less dense and rises. Examples in the text include a gravity furnace heating a room, water circulating in a boiling pot, ocean currents and the global circulation of the atmosphere.
NASA's thermal guidebook draws a useful line. Natural convection is driven only by gravity and the buoyancy of the heated fluid, while forced convection, the transfer between a moving fluid and a surface, is normally much stronger and should be treated separately. The same document points out that air in a box in orbit will not convect unless a fan moves it, so only gas conduction applies there.
Two OpenStax numbers show convection at work. A wind of 15.0 m/s at 0 ยฐC has the chilling effect of still air at about โ18 ยฐC, because moving air keeps replacing the warm layer next to your skin. And fully replacing the air in a 12.0 m by 18.0 m by 3.00 m house takes 8.36ร10โถ J of heating, which is 4.64 kW if done over 1800 seconds.
HyperPhysics adds a practical caveat: convection is hard to quantify in everyday settings, so it is often grouped with conduction when modelling something like body cooling.
Radiation: no medium required
Radiation is heat carried by electromagnetic waves. OpenStax gives the Stefan-Boltzmann law:
Q/t = ฯeATโด
Here ฯ = 5.67ร10โปโธ J/sยทmยฒยทKโด, A is surface area, T is absolute temperature in kelvin and e is emissivity. An ideal black body has e = 1 and a perfect reflector has e = 0. OpenStax lists tungsten filaments at about 0.5, carbon black at about 0.99 and skin at 0.97 in the infrared. For an object in surroundings at a different temperature, the net rate is ฯeA(Tโโด โ Tโโด).
OpenStax's example is a person with 1.50 mยฒ of skin at 33.0 ยฐC (306 K) standing in a dark room at 22.0 ยฐC (295 K), emissivity 0.97. The result is โ99 W: the person loses roughly 99 watts to the room by radiation alone, and OpenStax notes the sign is consistent with feeling cold in that room. The fourth power also means doubling a surface's absolute temperature multiplies its radiated power by 16.
NASA's guidebook applies the same idea to hardware: if an electronics box will be used in a vacuum, radiation inside the box is normally included in the thermal model, and a passive radiator needs an unobstructed view of deep space.
Why insulation works
The U.S. Department of Energy's building science pages say heat and moisture move through a home by conduction, convection and/or radiation, that insulation works by trapping pockets of air, and that the higher the R-value, the more slowly heat flows. Air's conductivity of 0.023 in the table above explains the first part. The DOE page also warns that poorly installed insulation can leave a gap where convection currents form and rise through it, which defeats the purpose of trapping still air.
Choosing the right mode in a problem
- A solid or still material between two temperatures: use conduction, kA(ฮT)/d.
- A fluid that is visibly or obviously moving: treat it as convection, natural if buoyancy drives it, forced if a fan, pump or wind does.
- A vacuum gap, a line of sight to a hot surface, or something glowing: use radiation, and convert to kelvin first.
- Unsure: estimate all three rates with the formulas above and compare the numbers before deciding which to keep in the model.
Take this further with Oakgen Agent
Agent can explain the three modes, work the calculations in a Python sandbox, write practice problems with solutions and a quiz, and export a study sheet as a docx or pdf.
Looking for a recap of one specific YouTube video? The YouTube Summarizer does that today.
Open this task in Oakgen Agent
The prompt is filled in for you. Nothing is sent until you press send.
Frequently asked questions
What are the three ways heat is transferred?
Conduction, convection and radiation. OpenStax's College Physics 2e describes conduction as heat transfer through a material by molecular collisions, convection as heat transfer driven by the large-scale flow of matter, and radiation as heat carried by electromagnetic waves. Most real situations involve more than one of them at the same time.
Which mode of heat transfer works through a vacuum?
Radiation. OpenStax states that no medium is required for electromagnetic waves to propagate, which is how the Sun warms the Earth across empty space. Conduction and convection both need matter. NASA's Passive Thermal Control Engineering Guidebook (Revision 4.0) adds that air inside a box in orbit does not convect unless a fan forces it, so only gas conduction should be considered in that case.
Why does temperature enter the radiation formula to the fourth power?
The Stefan-Boltzmann law in OpenStax is Q/t = ฯeATโด, with T in kelvin and ฯ = 5.67ร10โปโธ J/sยทmยฒยทKโด. Because of the exponent, doubling the absolute temperature of a surface multiplies its radiated power by 2โด, which is 16 (simple arithmetic on the formula). This is why hot objects shed heat by radiation far faster than warm ones.
What is the difference between natural and forced convection?
NASA's Passive Thermal Control Engineering Guidebook defines natural convection as heat transfer between a fluid and a solid surface driven only by gravity and the buoyancy of the heated fluid. Forced convection is the heat transfer between a moving fluid and a surface, for example when a fan or pump moves the fluid, and the guidebook says it is normally much stronger.
Sources
- OpenStax, College Physics 2e, 14.5 Conduction (read 2026-11-19)
- OpenStax, College Physics 2e, 14.6 Convection (read 2026-11-19)
- OpenStax, College Physics 2e, 14.7 Radiation (read 2026-11-19)
- Georgia State University, HyperPhysics, Heat Transfer (read 2026-11-19)
- NASA, Passive Thermal Control Engineering Guidebook, Revision 4.0, 25 September 2023 (read 2026-11-19)
- U.S. Department of Energy, Building Science Education: Heat Flow (read 2026-11-19)


