Skip to main content
  • Pricing
Tutorials

Speed vs. Velocity With an Out-and-Back Example

By Oakgen TeamPublished 1 min read

Share
Speed vs. Velocity With an Out-and-Back Example

Speed describes how fast something moves. Velocity also specifies a direction. On a straight line, pick a positive direction and keep that sign convention for the whole problem.

Walk east and then back west

Imagine walking 60 meters east in 30 seconds, then 20 meters west in 10 seconds. Your total time is 40 seconds. The distance traveled is 80 meters, including both parts of the route. Average speed is 80 ÷ 40 = 2 meters per second.

For average velocity, use the change in position. With east positive, the eastbound segment is +60 meters and the westbound segment is −20 meters. Your final position is 40 meters east of the start. Average velocity is +40 ÷ 40 = +1 meter per second, or 1 meter per second east.

Try a route that closes

Now suppose you walk back the full 60 meters. If the total trip lasts 60 seconds, the total distance is 120 meters and the average speed is again 2 meters per second. You end where you started, so the displacement and average velocity are both zero.

On a position-time graph, mark the starting and ending positions first. The line connecting those endpoints gives the average velocity over the interval. For average speed, add up the lengths of the separate portions of the trip. Whenever the direction changes, split the route there before adding those portions.

Continue with Oakgen Agent

Open in Oakgen Agent

Review the prefilled prompt before sending.

Open in Oakgen Agent

Sources

  1. OpenStax — Speed and Velocity
Share