Skip to main content
  • Pricing
Tutorials

How to compress an MP4 to 5 MB, 10 MB, or 25 MB

By Oakgen TeamPublished 2 min read

Share
How to compress an MP4 to 5 MB, 10 MB, or 25 MB

To compress an MP4 for upload, choose the receiving site's file limit, export a smaller copy, and open the download before sending it. A one-minute video has half the bitrate budget of a thirty-second video under the same cap. If the picture gets too soft, cut any footage the recipient does not need and export again from that shorter clip.

Compress an MP4 to 5 MB, 10 MB, or 25 MB

  1. Open Oakgen's MP4 compressor and click Choose a video. Select an MP4 up to 40 MiB and 2 minutes long.
  2. In Target file size, select 5 MB or smaller, 10 MB or smaller, or 25 MB or smaller. Choose the largest option the recipient accepts so the encoder has more room for picture detail.
  3. Click Compress video. Download the finished MP4 and compare its size with the upload limit. Open it and check that the audio and the last few seconds are intact.

The browser processes the file on your device. The export may change picture quality or dimensions to hit the target. If the original already fits the limit and plays on the receiving device, send that copy. For this browser compressor, start with an SDR video at 4K or smaller. If it cannot reach the chosen file size, trim the source or use a larger target that the recipient accepts.

Work backwards from the limit

For an editor that asks for a bitrate, use this estimate with decimal megabytes, where 1 MB is 1,000,000 bytes.

Total budget in Mbps โ‰ˆ file-size limit in MB ร— 8 รท clip duration in seconds.

Upload limitTotal budget for 30 secondsTotal budget for 60 seconds
5 MB1.33 Mbps0.67 Mbps
10 MB2.67 Mbps1.33 Mbps
25 MB6.67 Mbps3.33 Mbps

For a 30-second video under 10 MB, try around 2.3 Mbps for video and 128 kbps for audio if you are setting those values yourself. That leaves room for the MP4 container and variation in the encoded file. These are starting points for a manual export. Check the saved file's actual byte count if the upload limit is strict. FFmpeg bitrate controls ยท MDN container guide

Keep detail where the viewer needs it

In a screen recording, open the export at the size people will watch it and inspect the smallest text. Tight trimming or a lower frame rate may work for a mostly static screen. For a product demo with quick hands or camera movement, watch the busiest shot at normal speed. A still frame can hide jerky motion or detail that breaks up when the camera moves.

If a 5 MB export makes the label unreadable, try cutting the lead-in and the hold at the end. An eight-second product demo with a readable label may do the job. Save the shorter cut from the original file, then compress that copy once. Trim a video before compressing it

If the file still will not upload

Check the form's size limit and accepted file types. A rejected .mov clip may need an MP4 copy before size matters. If the form already accepts MP4 and the file is still too large, shorten the clip or try a lower target. Export from the source to avoid compressing the same copy repeatedly. Convert MOV to MP4

Share