Focus breathing is a small framing change during a shift in focus. An unexpected AI zoom changes the shot far more and can undermine the focus shift. Check how a stationary object is framed while you judge which parts of the image are sharp.
Make a frame you can measure
Place a railway ticket near the camera and a departures board in the distance, with a straight column edge visible on the left. The edge should remain at roughly the same location while the ticket becomes soft and the board comes into focus. In the AI video generator, reference a starting frame if supported and ask for a stationary position, a single focus shift, and no further camera move. Keep the opening and closing frame similar enough to compare at a glance.
Avoid combining a switch in focus with a subject walking forward. Moving subjects naturally change scale, which can make it harder to judge whether the lens moved.
Compare scale at the moment focus arrives
Place start and end stills on two layers in an editor, align the frame edges and toggle visibility. If the board grows substantially and the column disappears off the edge, you have a tighter framing. If the column only shifts a little while the board becomes sharp, the result may still read as a focus pull.
For a locked position, output two takes with the same geometry and different focal priorities. A short dissolve can suggest a focus shift if the reference shapes align. A hard cut is clearer when the destination needs to introduce new information.

