Skip to main content
  • Pricing
Tutorials

CMOS Logic Gates: Inverter, NAND, and NOR

By Oakgen TeamPublished 1 min read

Share
CMOS Logic Gates: Inverter, NAND, and NOR

A static CMOS gate uses a pull-up network to connect the output toward the high supply and a pull-down network to connect it toward ground. To reason about a simple gate, trace which path can conduct for one input combination. Then repeat for the remaining input states.

Start with the inverter

With the input low, the p-channel pull-up device conducts and the n-channel pull-down is off. The output is high. With the input high, the n-channel device conducts and the pull-up is off. The output is low. This switch-level model is a useful first pass before accounting for transition behavior.

Build the NAND and NOR truth tables

In a two-input NAND, the n-channel pull-down path uses devices in series. Both inputs must be high for that series path to conduct. The output is therefore low only for 11. The corresponding p-channel pull-up paths are in parallel.

For a two-input NOR, the n-channel pull-down paths are parallel. Either high input can provide a pull-down path. The output is high only for 00. Here, the p-channel pull-up devices are in series.

Write the four input combinations in order: 00, 01, 10, and 11. Identify the active network for each. Looking at both networks is a useful way to catch an incorrect series or parallel connection in a diagram.

Continue with Oakgen Agent

Open in Oakgen Agent

The prompt is filled in for you. Review it before sending.

Open in Oakgen Agent

Sources

  1. MIT CSAIL, CMOS Logic lecture notes
Share