Skip to main content
  • Pricing
Tutorials

Area Moment of Inertia of a Rectangle: A Worked Example

By Oakgen TeamPublished 1 min read

Share
Area Moment of Inertia of a Rectangle: A Worked Example

The area moment of inertia describes how a cross-sectional area is distributed around a specified axis. Distance from that axis matters quadratically. To compute a value, identify the axis on a sketch before choosing the formula.

Work through a rectangle

Suppose a rectangle is 40 mm wide and 60 mm tall. About the horizontal axis through the center, its area moment of inertia is width times height cubed divided by 12. Substitute 40 × 60³ ÷ 12 to get 720,000 mm⁴. The height is cubed because points vary in vertical distance from this axis.

Now move the axis to the base. Keep it horizontal so it remains parallel with the centroidal axis. The area is 40 × 60 = 2,400 mm², and the axis shift is 30 mm. The parallel-axis theorem gives the base value by adding the area times the squared distance:

720,000 + 2,400 × 30² = 2,880,000 mm⁴.

The result is larger because the relocated axis leaves more of the rectangle far from it. You can verify it with the direct base formula, width times height cubed divided by three.

Check the dimension and units

If you want the centroidal moment about a vertical axis, the width is the perpendicular dimension and is the one you cube. A calculation mixing millimeters and meters will miss the fourth-power unit by a large factor. Convert the dimensions first and carry the axis name through the arithmetic. This also distinguishes the geometric quantity from mass moment of inertia, which uses mass in its definition.

Continue with Oakgen Agent

Open in Oakgen Agent

Review the prefilled prompt before sending.

Open in Oakgen Agent

Sources

  1. Engineering Statics open textbook, parallel-axis theorem
  2. Engineering Statics, integral properties of shapes
Share