Skip to main content
  • Pricing
Use cases

How to Make an Open House Reel From Listing Photos

By Oakgen TeamPublished 3 min read

Share
How to Make an Open House Reel From Listing Photos

Make a 24-second open house Reel from four approved listing photos. Show where visitors will arrive, give them two views of the property, and hold the date, time, and next step on the last shot. Add a voiceover if it can explain a verified feature that the pictures leave unclear.

This schedule is a starting point for one open house. The property and event details below are placeholders to replace with approved listing information. The cover is an illustration.

Which four photos should I choose?

Pick images that help a viewer recognize the property and decide whether to visit. Use the entrance even if a room looks better as a still. People arriving in person need to recognize the building or doorway.

TimePhotoWhat the viewer learnsOn-screen wording
0 to 4 secondsExterior or entranceWhere the invitation is taking themOpen house ยท Saturday
4 to 9 secondsWide room viewHow a main part of the home is arrangedUse one verified feature
9 to 17 secondsDetail or second roomWhat they can look at in personName what the shot shows
17 to 24 secondsEntrance again or quiet photoWhen to visit and where to check detailsDate, time, street, one working next step

Use the strongest photo for each job. An exterior with a wide, clear crop can pull double duty on the end card. If your only second room photo has the windows cut off in a vertical crop, change the crop or use the photo as an inset. Check the resulting frame against the original before publishing.

Choose the feature you can explain in one sentence. An angle that shows the kitchen next to the dining room makes their position clear. Two disconnected close-ups make it harder to understand the layout.

What do I say in the voiceover?

Read one short invitation and two facts that match the photos. Record the words in the same order as the shots. Reserve the final card for event details and give the viewer time to read them.

Come take a look this [day] at [street name]. From the entry,
you can see [verified room detail]. The next photo shows
[verified feature]. See the open house hours on screen and
[one direction that matches where you publish].

Time the actual read before finishing the edit. A street name, unit number, or brokerage name can take longer than expected. If the narration runs over the card, cut a detail or shorten the invitation. Keep the card clear even when someone watches on mute. Replace the bracketed direction with the action available on that channel, such as "Open the link on my profile," "Tap RSVP," or "Open the listing link in this post." Use the same direction in the voiceover, event card, and post text. The 30-second voiceover timing guide gives you a worksheet for measuring takes.

For a repeat workflow, save the approved words next to the photo filenames. If a second agent edits the Reel, they can see exactly which picture supports each line. Describe the property's features and event logistics in the copy. For US housing ads, use your brokerage's fair housing review for any audience language and publishing settings.

How do I put the Reel together in Oakgen?

Arrange the photos in Compose and put the event text over the closing shot. The public Compose page shows a recorded example. Open the studio from that page to work with your own media. If you want narration, create the spoken take in Oakgen Audio, listen for the pronunciation of names and numbers, then bring the accepted take into the edit.

  1. Add the approved listing photos and arrange them in shot order.
  2. Match the timing to the shot card. Play the edit and give details that need explanation additional screen time.
  3. Add the measured narration if you have one. Check that every spoken feature matches the photo on screen.
  4. Add the event card and captions as needed. Review the exported file with sound on and with sound muted.
  5. Use the destination named in the Reel. Try the profile link, RSVP button, or link in the post on a phone and confirm it opens the current listing or event before you publish.

If you need a continuous tour to show how the rooms connect, film that route at the property. A phone walkthrough makes the layout clearer than separate stills. Use the full listing video guide when the job calls for a longer listing asset.

What should I check each time I reuse the edit?

Keep the sequence and text styling. Replace every property detail and confirm the open house information with the person managing the event.

Listing and approved media
Event date, time, and local time zone when relevant
Property address and unit
One detail from photo 2
One detail from photo 3
Required brokerage line
Listing or RSVP link
Person who confirms final details

On the final watch, pause on the first and last frames. Check for an old event date, a photo from the wrong property, or a card that crosses the phone interface. If the schedule changes after posting, update the caption and replace any video that still shows stale hours. Keep the worksheet with the listing so you can produce the next invitation from the same sequence.

How we checked this

On November 19, 2026, we checked Oakgen's public Compose and Audio pages and HUD's fair housing overview. The timing card is an editorial example. We did not film a property, measure a generated take, or export a sample listing video for this guide.

Build your open house Reel

Bring your approved photos into Compose and assemble a reusable listing edit.

Open Compose

Frequently asked questions

How many photos do I need for an open house Reel?

Start with four approved photos. Use an exterior or entrance, a room that establishes the layout, a feature with a verifiable detail, and a closing shot with space for the event card. If you have only three photos, reuse the exterior as the closing shot.

Can I make an open house video without filming at the property?

Yes. A photo Reel can show the property and invite viewers to the open house. Work from approved photos of the actual listing, use a readable event card, and reserve a filmed tour for cases where buyers need to see how rooms connect.

What should I put on an open house video end card?

Show the date, time, address or approved listing identifier, and one next step. Add the brokerage name where your listing or advertising rules require it. Keep the card up long enough to read and repeat event details in the post caption.

Should every open house Reel have a voiceover?

A voiceover can connect the shots or name a verified feature that is hard to see. A silent photo Reel works when the captions, closing card, and post text carry the invitation on their own.

Can I reuse the same Reel for my next property?

Reuse the shot order, text style, and closing-card layout. Replace the photos, narration, captions, listing link, and event details, then check the export for any references to the previous property.

Sources

  1. Oakgen Compose editor preview
  2. Oakgen AI Voice Generator
  3. HUD Fair Housing Rights and Obligations
Share