When a box of secondhand kitchenware arrives, assign an inventory number before matching brands or writing listings. Photograph each piece in full and take a second picture of the underside. Use a product identifier to get candidate names. Confirm those names against marks, dimensions and a reliable reference before putting them on a price tag.
Which photographs make an uncertain match easier to check?
Put a temporary stock number next to the piece for your intake picture. Photograph the silhouette straight on, the base mark with side lighting, and any lid or insert separately. Measure the actual diameter. Two dishes from the same range may look identical in a photograph and accept different lids.
Give Oakgen’s Product Identifier one clear image and check the displayed credit cost. Take suggested maker and model names into your own search. An analyst’s description of a flared rim can be useful even when its first brand guess is wrong. For a partly legible maker’s symbol, the logo identification guide covers cropping a separate reference. Compare a likely match with a manufacturer catalogue or a reference that shows the same mark and measurements.
How do you record a partial match?
For a fictional blue casserole marked 24 on the underside, the number is visible evidence. Its meaning still needs confirmation. Start with this intake note:
| Field | Example entry |
|---|---|
| Stock item | K-042, oval blue casserole with separate lid |
| Direct observation | Base stamped 24, shallow chip at left handle |
| Follow-up | Measure outer rim and compare the lid's underside mark |
| Listing decision | Describe measured size and chip. Leave maker pending |
Photograph the chip in the light a buyer would use at home. Keep condition and identification separate. A close match in a catalogue does nothing to establish whether this particular dish has been repaired. Avoid claims about heat, appliance or food-use suitability without documentation for the exact item.
How do you keep the next box in order?
Use one bag or tray for the tagged parts of each set. Move a second lid into that tray only after its fit and mark have been checked. When two pieces prove to be from different ranges, give each a separate stock reference and update the photos. Those few extra seconds prevent a description written for one pot from travelling with another.
A buyer-facing title can stay modest and specific while research continues: “Blue oval covered dish, measured rim 24 cm, small chip at handle.” Add a manufacturer name later when you can show why it belongs there.
How we checked this
We checked the Product Identifier’s report for model suggestions and visible features on November 19, 2026. K-042 is an illustrative stock record.
Start an inventory identification
Choose a clear photograph of one item and keep its underside mark available.
Frequently asked questions
How do I list a piece with no maker’s mark?
Lead with its visible form, colour, measured dimensions and condition. Leave the manufacturer field unknown until you have evidence.
Can the analyzer price collectible cookware?
Treat any price as a lead for research. Check comparable sales for the exact size, pattern, condition and included parts before setting your own price.
Why keep the underside photo after publishing?
It preserves the mark used for identification and lets you answer future questions about a similar piece or correct a mistaken match.





