A hydraulic disc brake slows a rotor when two pads press against its faces. Both fixed and floating calipers can clamp from both sides. They differ in how the pad on each side comes into contact.
Follow the force in a floating caliper
Picture the rotor edge on as a vertical line, with a pad on either side. Put the hydraulic piston behind the inner pad. When pressure moves the piston, it pushes that pad toward the rotor. The reaction pulls the caliper housing along its guides. The housing carries the outer pad toward the other face of the rotor.
Make a sketch with one arrow for the piston and a second arrow, in the opposite direction, for the moving housing. Mark which arrow crosses the caliper guide rather than the rotor.
Follow the force in a fixed caliper
Here the housing stays attached in position. Put a piston behind each pad in your sketch. Hydraulic pressure moves pistons on both sides and pushes the pads toward the rotor. Some calipers have more than one piston per side. Identify the layout by where the pistons are placed and whether the housing itself is designed to slide.
If you only have a photo, look for the mounting and guide arrangement before identifying the mechanism. A manufacturer drawing for the exact part can show hidden pistons and guides. For a vehicle-specific replacement or service decision, use the applicable manufacturer information and part identification.
Continue with Oakgen Agent
Open in Oakgen Agent
Review the prefilled prompt before sending.


